Just For U All, Free From KLM. Happy Beading.

• 1RUSSSIAN SPIRAL
MATERIALS NEEDED:
1. Size 1 sand bead (sb)
2. Size 6 crystal bead (cb)
3. 0.30mm fishing line (fl)
4. Beading needle
PROCEDURE
▷ Pick 1sb and 1cb three times and form a ring
▷ Exit fl from a sb and pick up1cb and 5sb and stitch through the next sb
▷ Repeat previous step
TO STEP UP
▷ Pick 1cb and 5sb and stitch through the first sb after cb in step 2
▷ Continue till you get desired length.
2. FOUR WAY SPIRAL
MATERIALS NEEDED:
▷ Size 6 crystal bead (cb)
▷ Size 2 sand bead (sb)
▷ 0.35 fishing line (fl)
▷ Beading neddle
PROCEDURE
▷ Cut a comfortable length of FL into four equal sizes
▷ Insert a single stopper at the end of all the four FL
▷ Insert 7SB into each of the FL
▷ Divide the FL into two groups making it two groups
▷ Pick up the first group and cross with 1CB
▷ Repeat previous step for the other group
▷ Pick a line from each of the group and join them side by side to form another group of FL
▷ Pick one group of the FL and Insert 4SB on the FL (left line)
▷ Insert 1CB on the right line and cross the line with 1SB
▷ Repeat two previous steps to the other group
▷ Continue to get desired length
▷ To round up repeat step 3 and insert stopper and hook


3.  FLOWER ON SPIRAL ROPE
▷ Insert needle into previous spiral work and pick 4sb, 1cb6 and 1sb
▷ Skip the last sb and pass needle under the cb6, 4sb and back into the previous spiral rope beads
▷ Then pass needle into the next sb on the spiral rope




4.  LEAFY DESIGN
MATERIALS NEEDED:
▷ Crystal bead size 6&8 (CB6&CB8)
▷ Size 50 fishing line (FL)

PROCEDURE
▷ Insert 2CB8 and 2CB6 on the right, 2CB6 on the left and interlock with 2CB8
▷ Put 2CB6 on the left, another 2 on the right then interlock with 2CB8
▷ Continue until you get desired length
TO TURN:
▷ Insert 2CB6 and 2CB8 on your left, cross with 2CB6
▷ Insert 2CB8 and 2CB6 on the left FL then cross with 2CB8
▷ Pass the right FL into the previous 2CB6 by the side and insert 2CB6 on the left FL and cross with 2CB8
▷ Continue previous step till you get till the end and turn again (3 steps)
5.  BRIDE BRACELET
 MATERIALS NEEDED
▷ Size 2 sand bead (sb)
▷ Crystal bead size 8(CB8)
PROCEDURE
▷ Insert hook and stopper to FL after dividing into 2sides (left and right)
▷ Insert 10SB to each sides and cross both side with 1CB
▷ Insert 10SB to each sides and insert 2SB
▷ Insert 10SB and cross with 1CB
▷ Repeat 2-3 to get desired length
6.   BEADED ROSE
MATERIALS NEEDED
▷ Crystal bead size6(cb)
▷ Size 2 sand beads (sb)
▷ 0.40Fishingline
▷ Beading needle
PROCEDURE
▷ Insert 8cb and tie to form a ring
▷ Pass needle into immediate bead after knot and insert 1sb, 1cb, 3sb, 1cb and 1sb into that same crystal you passed your needle into
▷ Insert8sb and pass needle into the 3sb in the previous step
▷ Pass another 8sb and pass needle into the bead in step 2
▷ Pass needle into the next crystal and repeat step 3-4



7.  FLAT SPIRAL
MATERIALS NEEDED:
▷ 0.35 fishing line
▷ Crystal bead size 4 and 6
▷ Size 2 sand bead
▷ Beading needle
 PROCEDURE
▷ Pick up 2cb6, 7sb, 1cb4 and 7sb and sew back through the 2size6 in the same direction. Push the loop of the sb and cb4 to the right of the two cb6
▷ Pick 7sb, 1cb4 and 7sb and sew through the last cb6 and push to the left of the 2cb6
▷ Pick up 1cb6, 7sb, 1cb4 and 7sb and sew through the last next cb6 in the previous step and the new one just added and push new loop to the right
▷ Repeat procedure to get desired length.


8.   30 BEADED BALL PROCEDURES
(Any size of bead. 0.40 or 0.50 fishing line)

PROCEDURE
NOTE: pass with right hand and pick beads with left
▷ Pick 4 and cross with 1
▷ Pick 3 and cross with 1 and pass fl to the next bead
▷ Pick 2 and cross with 1 and pass into next bead
▷ Pick 2 and cross with 1 and pass into next bead
▷ Pick 2 and cross with 1 and pass into next bead
▷ Pick 1 and cross with 1 and pass to the next bead
▷ Pick 2 and cross with 1 and pass into next 2 beads
▷ Pick 1 and cross with 1 and pass into next 2 beads
▷ Pick 1 and cross with 1 and pass into next 2 beads
▷ Pick 1 and cross with 1 and pass into next 3 beads
▷ Cross both lines with 1 beads and tie

9.   PICOT CORN
MATERIALS NEEDED:
▷ 0.35 fishingline
▷ Size 2 sand bead
▷ Crystal bead size 6
▷ Beading needle
PROCEDURE
▷ Insert 6sb and tie to form a ring and enter into the sb next to the knot
▷ Pick a sb and skip the next sb to the one you entered on the ring and enter the next sb
▷ Repeat previous step until you get the desired length e.g 18inches
▷ (to close) move the needle round the sb at the top of a couple of times to close the circle
▷ Insert the needle into the sb on the next line to the left
▷ Pick 5sb and enter the sb up on the next line
▷ Repeat previous  step for the quarter of the work
▷ To continue, follow the same movement but pick a crystal bead and a sb, insert the needle back into the cb then climb
▷ Repeat previous step for half of the entire length and repeat previous method to finish the remaining quarter.

10.   FLATRON DESIGN
MATERIAL NEEDED:
▷ 0.35 fishing line
▷ Beading needle
▷ Crystal bead size 8
▷ Sand bead size 2
PROCEDURE
▷ Cut  a long fl and string 4sb on the left side, 1 cb on the right and cross with 1 sb
▷ String 4sb on the right side and 1cb on the left and cross with 1sb
▷ Continue step 1-2 to get desired length
STAGE 2
▷ Cut a fresh fl, pass the left side fl through the first cb of stage 1
▷ String 4sb on the left side and pass it through the third cb of stage 1
▷ With right hand, string 1 cb and 4sb and cross with 1sb
▷ With left string 4sb and skip the next cb and pass through the next one
▷ With the right side, sting 1cb, 4sb and cross with 1sb
▷ Repeat stage 2 till you get to the end of stage 1

STAGE 3
▷
▷ Cut another fl and repeat stage 2 till you get to the end
▷ Starting like stage 2 but instead of 4sb, it will decrease to 3sb
NOTE: the more step, the lesser he sb will be

11.   DOUBLE SPIRAL ROPE
MATERIALS NEEDED:
▷ 0.30 fishing line
▷ Beading needle
▷ Sand bead size 2
▷ Crystal beads size 4
PROCEDURE
▷ On a comfortable beading thread, pick up 4cb4 and 7sb then stitch back through the 4cb4 and pull tightly to make them fall side by side
▷ Pick up 1cb4 and 7sb, stitch up through 3cb4 and the new one added and pull
▷ Continue by picking 1cb4 and 7sb and stitch up through t3cb4 existing and new one added till you get desired length.

12.   CRYSTAL SPIRAL 1
MATERIALS NEEDED:
▷ Crystal bead size 6
▷ Sand bead size 6
▷ Beading needle
▷ 0.30fishingline

PROCEDURE
▷ String 1cb, 3sb, 1cb, 3sb and icb and pass fl into the cb to form a ring
▷ String 3sb and 1cb and pass fl into the next cb
▷ Continue inserting 3sb and 1cb to get desired length
NOTE: there will be 2cb beside each other, always pass needle into the first cb
13.   FISH BONE
MATERIALS NEEDED:
▷ 0.35 fishing line
▷ Size 2 sand bead
▷ Beading needle
▷ Crystal bead size 4
PROCEDURE
▷ Add stop bead
▷ Drop 6sb and pass fl through the middle 3sb upwardly ( 2 sb fall to the side)
▷ Drop 1sband pass fl from above through the 4sb i.e using the one used as stop bead
▷ Drop 1cb and pass fl through the 2sb on the other side
▷ Now, drop 4sb to make 6sb on the cb and repeat all steps to get desired length
STEP 2
▷ Pick a new fl and tie
▷ Repeat steps 1-3 in step 1
▷ Then pass fl through the first cb on completed step 1 and through the 2 sb on the other side
▷ Drop 4sb and repeat procedure

14.  MODIFIED ABUJA CONNECTION
MATERIALS NEEDED:
▷ Size 2 sand bead
▷ Crystal bead size 8
▷ 0.35 fishing line
▷ Beading needle

PROCEDURE
▷ Insert I cb and slide to the middle, add 5sb each to left and right sides and cross with cb
▷ Continue till you get desired length

PHASE2
▷ Cut a new fl and insert it into the first cb added in step 1
▷ Add 5sb to the left fl and add 1cb, 5sb and 1cb to the right fl
▷ Then insert the right fl into the second crystal in step1
NOTE: Continue phase 2 to get desired width, you will continue by adding 1 bead to new step just like the conventional design.
15.   BUSH DESIGN
MATERIAL NEEDED:
▷ Size 2 sand bead
▷ Beading needle
▷ 0.35 fishing line
▷ Gold ball accessory

PROCEDURE
▷ Cut 6 pieces of fl and add stopper at the tip
▷ Pick 1 out of the fishing lines
▷ Insert 7sb and pass the fl back into the first sb
▷ Insert another 7sb and pass through the first sb again
▷ Continue the procedure 10times
▷ Repeat the same for the other fishing lines.
▷ Insert a gold ball
▷ Start procedure again
▷ Continue till you get desired length.

16.   BRIDAL CODE
MATERIAL NEEDED:
▷ Crystal size 6
▷ Size 2 sand bead
▷ 0.35 fishing line
PROCEDURE
▷ Pick 1cb, 2sb, 1cb and 4sb, then pass fl through the third sb
▷ Pull and pick 2sb, 1 cb, 2 sb and pass needle through initial cb and tie
▷ Pick 4sb, go through the third sb and pick 2 sb, 1cb, 2sb and pass fl through the third cb in step 1
▷ Pick 4sb, go through the third sb, pick 2sb, 1 cb
▷ Continue till you get desired length
PHASE 2
▷ From 4sb, pass fl into the bottom of first cb at the top of the work
▷ Bring it out from the top and pick 5sb and go through the bottom of the next cb.





17.   TUBIC DESIGN
MATERIALS NEEDED:
▷ Size 2 sand bead
▷ Crystal bead size 4
▷ 0.30 fishing line
▷ Beading needle
PROCEDURE
▷ String 3sb and 1cb seven times and interlock with the last sb to form a circle
▷ String 3sb, 1cb and 3 sb, then skip 1cb and insert into the next cb after it
▷ Continue till you get desired length
▷ Put bead cap and finish up
18.   BULGE SPIRAL 2
MATERIALS NEEDED:
▷ Crystal bead size 4
▷ Bulge bead
▷ 0.35 fishing line
▷ Beading needle
▷ Coned shape bead

 PROCEDURE
▷ Cut fishing line
▷ On right side, string 1cb, 2bb, 1cb, 2bb then cross with the last 2bb inserted
▷ On right side, insert 1cb, 2bb and cross with the last inserted bb
▷ Continue the previous step until you get 10bb
▷ String 1cb on right side and cross with the first bb started with
▷ String 1cb and cross with it
▷ At the left side, string 2bb, 1cb and cross with 2 bb
▷ Pass right side fl into the next cb and string 1cb, 2bb on left and cross with 2 bb
▷ Continue previous step until you have 9bb
▷ Pass fishing line into the next cb and the first 2cb started work with
▷ String I cb on left side and cross at it
▷ Continue till desired length
PHASE 2
▷ Cut a new fishing line
▷ String 10 cone bead and place in the middle of each set
▷ Tie and cut off
▷ Repeat the same stage 2 of each set before going to the next stage




19.   MODIFIED SPIRAL ROPE
MATERIALS NEEDED:
▷ Size 3 sand bead
▷ Beading needle
▷ Crystal bead size 6
▷ 0.30 fishing line
PROCEDURE
▷ Cut a comfortable length of fishing line and insert a stop bead
▷ Pick up 6sb, 1cb and 2sb
▷ Stitch needle up through the first 4sb and pull snugly
▷ Pick up 3sb, 1cb and 2sb
▷ Stitch through the existing 3 sb and the new sb inserted and pull
▷ Repeat till you have desired length.

20.   MATTING NECK PIECE
MATERIALS NEEDED:
▷ Crystal bead size 6
▷ Sand bead size 2
▷ 0.35 fishing line
▷ Beading needle
PROCEDURE
▷ 1 cb, clasp, 1 cb then cross with 1sb
▷ I cb on both sides then cross with 1cb
▷ 1cn on both sides and cross with a sb
▷ Follow patter till you get desired length
PHASE 2
▷ String 5sb, 1cb, 5sb then pass fl through the cb used in interlocking previous step
▷ Repeat previous step till you get the desired width
PHASE 3
▷ (netting step) pick 2 sb, 1cb, 2sb and insert needle into crystal in the upper part
▷ Continue netting pattern to get design

17.   TUBIC DESIGN
MATERIALS NEEDED:
▷ Size 2 sand bead
▷ Crystal bead size 4
▷ 0.30 fishing line
▷ Beading needle
PROCEDURE
▷ String 3sb and 1cb seven times and interlock with the last sb to form a circle
▷ String 3sb, 1cb and 3 sb, then skip 1cb and insert into the next cb after it
▷ Continue till you get desired length
▷ Put bead cap and finish up