SIDE LATERS DESIGN

SIDE LAYERS.
Cut a comfortable length of fishing line(FL) .
STEP 1: String your hook to the center of the FL, join the tips of the FLs, string two crimp beads (stoppers) and flatten with your chain nose pliers.
STEP 2: String 1 crystal bead (cb) into both FLs,
STEP 3: separate it and string 8 sand beads(sbs) on your left fishing line (LFL) and the same on your RFL, then 2cbs on either your LFL or RFL and cross it with the free FL.
STEP 4: Repeat step 3 again but on your RFL, string 5sbs instead of 8sbs.
STEP 5: Do the same thing with 3cbs (twice) in step 4's pattern i.e (8sbs on your LFR, 5sbs on your RFL, 3cbs on either your LFL or RFL.
STEP 6: Do the same thing with 4cbs (twice) but when doing the second one, reduce the sbs on your RFL by one.
NOTE: Now you will start using 8sbs on your LFL and 4sbs on your RFL.
STEP 7: Do 5 to 12cbs (once) when you get to 13cbs, repeat it twice.
STEP 8: Do 14cbs (four times) at this stage you are at the middle of the neck.
So to do the other half of the neck, you will start decreasing the cbs not increasing.
STEP 9: Do 13cbs (twice) again, then 12 to 5cbs (once)
STEP 10: Do 4cbs (twice) but for the second one increase the sbs by one i.e 8sbs on your LFL and 5sbs on your RFL.
Continue repeating like that till you get to 2cbs.
NEXT: String 8sbs on your LFL and 8sbs on your RFL,1cb on both FLs, crimp beads (stoppers), the second part of the hook, then pass your FLs back into the crimp beads, flatten it, pass the remaining FLs back into your